hashcat Forum - cudaHashcat-plus 0 c/s ?

Pages: 1 2

Hi, I'm using cudaHashcat-plus on gentoo and that's the output I'm getting:

cudaHashcat-plus v0.08 by atom starting...

Hashes: 1
Unique digests: 1
Bitmaps: 8 bits, 256 entries, 0x000000ff mask, 1024 bytes
GPU-Loops: 128
GPU-Accel: 8
Password lengths range: 1 - 15
Platform: NVidia compatible platform found
Watchdog: Temperature limit set to 90c
Device #1: GeForce GT 650M, 2047MB, 405Mhz, 2MCU
Device #1: Allocating 4MB host-memory
Device #1: Kernel ./kernels/4318/m1000_a3.sm_30.64.cubin

[s]tatus [p]ause [r]esume [q]uit =>
Status.......: Running
Input.Mode...: Mask (?1?1?1?1?1?1?1?1)
Hash.Target..: <removed>
Hash.Type....: NTLM
Time.Running.: 3 secs
Time.Left....: 0 secs
Time.Util....: 3576.5ms/0.0ms Real/CPU, 0.0% idle
Speed........: 0 c/s Real, 0 c/s GPU
Recovered....: 0/1 Digests, 0/1 Salts
Progress.....: 0/218340105584896 (0.00%)
Rejected.....: 0/0 (0.00%)
HW.Monitor.#1: 0% GPU, 50c Temp
[s]tatus [p]ause [r]esume [q]uit =>
Status.......: Running
Input.Mode...: Mask (?1?1?1?1?1?1?1?1)
Hash.Target..: <removed>
Hash.Type....: NTLM
Time.Running.: 4 secs
Time.Left....: 0 secs
Time.Util....: 4049.7ms/0.0ms Real/CPU, 0.0% idle
Speed........: 0 c/s Real, 0 c/s GPU
Recovered....: 0/1 Digests, 0/1 Salts
Progress.....: 0/218340105584896 (0.00%)
Rejected.....: 0/0 (0.00%)
HW.Monitor.#1: 0% GPU, 50c Temp
[s]tatus [p]ause [r]esume [q]uit =>
Status.......: Running
Input.Mode...: Mask (?1?1?1?1?1?1?1?1)
Hash.Target..: <removed>
Hash.Type....: NTLM
Time.Running.: 4 secs
Time.Left....: 0 secs
Time.Util....: 4221.3ms/0.0ms Real/CPU, 0.0% idle
Speed........: 0 c/s Real, 0 c/s GPU
Recovered....: 0/1 Digests, 0/1 Salts
Progress.....: 0/218340105584896 (0.00%)
Rejected.....: 0/0 (0.00%)
HW.Monitor.#1: 0% GPU, 50c Temp

It always shows 0 c/s. any ideas?

What is the command line that you are using?

(08-21-2012, 05:13 AM)D3ad0ne Wrote: [ -> ]What is the command line that you are using?

cudaHashcat-plus64.bin --force -m 1000 -a 3 input.txt -1 ?l?u?d ?1?1?1?1?1?1?1?1

(08-21-2012, 05:11 AM)mtr0ll Wrote: [ -> ]It always shows 0 c/s. any ideas?

And after 4 sec, is it the same ?

(08-21-2012, 07:44 AM)Mem5 Wrote: [ -> ]
(08-21-2012, 05:11 AM)mtr0ll Wrote: [ -> ]It always shows 0 c/s. any ideas?

And after 4 sec, is it the same ?

same after an hour.

Which driver is installed?

(08-21-2012, 10:30 AM)atom Wrote: [ -> ]Which driver is installed?

nvidia. modinfo shows version 295.59

Do not post hashes unless its requested.

(08-21-2012, 11:19 AM)radix Wrote: [ -> ]Do not post hashes unless its requested.

I've changed the hashes before posting.

having the same issue here.

The temp of the cards is high because I was just running a different GPU program to make sure that they actually work.

Code:
root@bt:~/oclHashcat-plus-0.08# ./cudaHashcat-plus64.bin --hash-type 2500 -a 3 --outfile /root/results.out -1=?l?d /root/input.hccap ?1?1?1?1?1?1?1?1

cudaHashcat-plus v0.08 by atom starting...

Hashes: 1

Unique salts: 1

Unique digests: 1

Bitmaps: 8 bits, 256 entries, 0x000000ff mask, 1024 bytes

GPU-Loops: 64

GPU-Accel: 1

Password lengths range: 8 - 15

Platform: NVidia compatible platform found

Watchdog: Temperature limit set to 90c

Device #1: GeForce GTX 680, 2047MB, 705Mhz, 8MCU

Device #2: GeForce GTX 680, 2047MB, 705Mhz, 8MCU

Device #1: Allocating 1MB host-memory

Device #1: Kernel ./kernels/4318/m2500.sm_30.64.cubin

Device #2: Allocating 1MB host-memory

Device #2: Kernel ./kernels/4318/m2500.sm_30.64.cubin

[s]tatus [p]ause [r]esume [q]uit => s

Status.......: Running

Input.Mode...: Mask (?1?1?1?1?1?1?1?1)

Hash.Target..: [removed]

Hash.Type....: WPA/WPA2

Time.Running.: 2 secs

Time.Left....: 0 secs

Time.Util....: 2504.2ms/0.0ms Real/CPU, 0.0% idle

Speed........:        0 c/s Real,        0 c/s GPU

Recovered....: 0/1 Digests, 0/1 Salts

Progress.....: 0/3512479453921 (0.00%)

Rejected.....: 0/0 (0.00%)

HW.Monitor.#1:  0% GPU, 77c Temp

HW.Monitor.#2:  0% GPU, 76c Temp

[s]tatus [p]ause [r]esume [q]uit => s

Status.......: Running

Input.Mode...: Mask (?1?1?1?1?1?1?1?1)

Hash.Target..: [removed]

Hash.Type....: WPA/WPA2

Time.Running.: 18 secs

Time.Left....: 0 secs

Time.Util....: 18424.1ms/0.0ms Real/CPU, 0.0% idle

Speed........:        0 c/s Real,        0 c/s GPU

Recovered....: 0/1 Digests, 0/1 Salts

Progress.....: 0/3512479453921 (0.00%)

Rejected.....: 0/0 (0.00%)

HW.Monitor.#1:  0% GPU, 74c Temp

HW.Monitor.#2:  0% GPU, 76c Temp

[s]tatus [p]ause [r]esume [q]uit =>

root@bt:~/oclHashcat-plus-0.08# nvidia-smi

Tue Aug 21 15:57:31 2012

+------------------------------------------------------+

| NVIDIA-SMI 3.295.41   Driver Version: 295.41         |

|-------------------------------+----------------------+----------------------+

| Nb.  Name                     | Bus Id        Disp.  | Volatile ECC SB / DB |

| Fan   Temp   Power Usage /Cap | Memory Usage         | GPU Util. Compute M. |

|===============================+======================+======================|

| 0.  GeForce GTX 680           | 0000:02:00.0  N/A    |       N/A        N/A |

|  54%   76 C  N/A   N/A /  N/A |   9%  180MB / 2047MB |  N/A      Default    |

|-------------------------------+----------------------+----------------------|

| 1.  GeForce GTX 680           | 0000:03:00.0  N/A    |       N/A        N/A |

|  53%   73 C  N/A   N/A /  N/A |   3%   54MB / 2047MB |  N/A      Default    |

|-------------------------------+----------------------+----------------------|

| Compute processes:                                               GPU Memory |

|  GPU  PID     Process name                                       Usage      |

|=============================================================================|

|  0.           Not Supported                                                 |

|  1.           Not Supported                                                 |

+-----------------------------------------------------------------------------+

Pages: 1 2