Please note, this is a STATIC archive of website hashcat.net from 08 Oct 2020, cach3.com does not collect or store any user information, there is no "phishing" involved.

hashcat Forum

Full Version: Catalyst v13.1
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hi,

I know I probably shouldn't be asking for help installing Catalyst 13.1 on the HC forums, but here goes;


When installing 'amd-driver-installer-catalyst-13.1-linux-x86.x86_64.run'

it installs fine.

Then when I 'startx';

Code:
X.Org X Server 1.12.3
Release Date: 2012-07-09
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-29-xen x86_64 Ubuntu
Current Operating System: Linux Swan 3.2.0-34-generic #53-Ubuntu SMP Thu Nov 15 10:48:16 UTC 2012 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-34-generic root=UUID=3f4f51b6-d393-4155-a765-454f51daaf5c ro quiet radeon.modeset=0
Build Date: 09 July 2012  05:20:18PM
xorg-server 2:1.12.3+git20120709+server-1.12-branch.60e0d205-0ubuntu0ricotz~precise (For technical support please see https://www.ubuntu.com/support)
Current version of pixman: 0.28.2
    Before reporting problems, check https://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb  4 02:07:50 2013
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found

Backtrace:
0: /usr/bin/X (xorg_backtrace+0x34) [0x7fa7d405f584]
1: /usr/bin/X (0x7fa7d3ed9000+0x18a36a) [0x7fa7d406336a]
2: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7fa7d31ff000+0xfcb0) [0x7fa7d320ecb0]
3: /usr/bin/X (xf86GetEntityPrivate+0x1c) [0x7fa7d3f5c2ec]
4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs112_atiddxPxScreenInit+0x5f) [0x7fa7cfbc4dcf]
5: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs112_atiddxScreenInit+0x100) [0x7fa7cfba1890]
6: /usr/bin/X (AddScreen+0x171) [0x7fa7d3f27d71]
7: /usr/bin/X (InitOutput+0x294) [0x7fa7d3f67b34]
8: /usr/bin/X (0x7fa7d3ed9000+0x3d70d) [0x7fa7d3f1670d]
9: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xed) [0x7fa7d208f76d]
10: /usr/bin/X (0x7fa7d3ed9000+0x3dbd1) [0x7fa7d3f16bd1]

Segmentation fault at address 0x7fa666e7ff10

Caught signal 11 (Segmentation fault). Server aborting

Please consult the The X.Org Foundation support
     at https://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

ddxSigGiveUp: Closing log
Server terminated with error (1). Closing log file.

The only way I can get hashcat to work is to

Code:
sh amd-driver-installer-catalyst-13.1-linux-x86.x86_64.run --uninstall=force

sudo apt-get install fglrx fglrx-amdcccle

And it's not at 13.1, so I get the "You need -exactly- Catalyst v13.1 for very good reasons
"

Of course, I could use --force, but what happens when a crucial update happens?


Is there any 'step by step' guide for upgrading?

Thanks
try:
1. amdconfig --uninstall (as root)
2. reboot
3. install 13.1 again on default, I mean:
Code:
sudo sh ./amd-driver-installer-catalyst-13.1-linux-x86.x86_64.run
and do not generate deb package, just let it to install by itself.
4. after install do:
Code:
sudo amdconfig --adapter=all --initial -f
5. reboot
6. try
(02-03-2013, 07:57 PM)KT819GM Wrote: [ -> ]try:
1. amdconfig --uninstall (as root)
2. reboot
3. install 13.1 again on default, I mean:
Code:
sudo sh ./amd-driver-installer-catalyst-13.1-linux-x86.x86_64.run
and do not generate deb package, just let it to install by itself.
4. after install do:
Code:
sudo amdconfig --adapter=all --initial -f
5. reboot
6. try

Hi, sorry for the late reply.

After doing that, I still get this while running 'startx';

Code:
1 Saturday - 03:24:10 (toil@Swan) ~/oclHashcat-plus-0.13 $ sudo startx


X.Org X Server 1.12.3
Release Date: 2012-07-09
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-29-xen x86_64 Ubuntu
Current Operating System: Linux Swan 3.5.0-18-generic #29-Ubuntu SMP Thu Oct 25 07:26:14 UTC 2012 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-18-generic root=UUID=3f4f51b6-d393-4155-a765-454f51daaf5c ro
Build Date: 09 July 2012  05:20:18PM
xorg-server 2:1.12.3+git20120709+server-1.12-branch.60e0d205-0ubuntu0ricotz~precise (For technical support please see https://www.ubuntu.com/support)
Current version of pixman: 0.28.2
        Before reporting problems, check https://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 16 03:24:20 2013
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found

Backtrace:
0: /usr/bin/X (xorg_backtrace+0x34) [0x7f6d299d6584]
1: /usr/bin/X (0x7f6d29850000+0x18a36a) [0x7f6d299da36a]
2: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7f6d28b76000+0xfcb0) [0x7f6d28b85cb0]
3: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs112_atiddxPxScreenInit+0x65) [0x7f6d2553bdd5]
4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs112_atiddxScreenInit+0x100) [0x7f6d25518890]
5: /usr/bin/X (AddScreen+0x171) [0x7f6d2989ed71]
6: /usr/bin/X (InitOutput+0x294) [0x7f6d298deb34]
7: /usr/bin/X (0x7f6d29850000+0x3d70d) [0x7f6d2988d70d]
8: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xed) [0x7f6d27a0676d]
9: /usr/bin/X (0x7f6d29850000+0x3dbd1) [0x7f6d2988dbd1]

Segmentation fault at address (nil)

Caught signal 11 (Segmentation fault). Server aborting

Please consult the The X.Org Foundation support
         at https://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

ddxSigGiveUp: Closing log
Server terminated with error (1). Closing log file.




Thanks.