I installed the following and after that it worked again.
nvidia-libopencl1
libnvidia-ptxjitcompiler
libnvidia-encode1
Probably only the libnvidia-encode1 that's needed but now it works again.
Thanks
(09-21-2016, 02:53 AM)KhanKrum Wrote: [ -> ]Predator, I've found a solution! I suppose you are running Debian or Ubuntu based system...
1. If you don't have it already - install synaptic
Code:
sudo apt-get update && sudo apt-get install synaptic
3. At last I have installed :
Code:
diffstat (1.61-1)
libegl1-nvidia (367.44-1)
libgles1-nvidia (367.44-1)
libgles2-nvidia (367.44-1)
libnvidia-egl-wayland (367.44-1)
libnvidia-encode1 (367.44-1)
libnvidia-fbc1 (367.44-1)
libnvidia-ifr1 (367.44-1)
libnvidia-ptxjitcompiler (367.44-1)
module-assistant (0.11.9)
nvidia-kernel-source (367.44-1)
nvidia-libopencl1 (367.44-1)
nvidia-smi (367.44-1)
quilt (0.63-5)
and removed:
Code:
nvidia-smi:i386
ocl-icd-libopencl1
The result:
Code:
hashcat -m 2500 -b
hashcat (v3.10) starting in benchmark-mode...
OpenCL Platform #1: NVIDIA Corporation
======================================
- Device #1: GeForce GTX 750 Ti, 499/1999 MB allocatable, 5MCU
OpenCL Platform #2: Mesa, skipped! No OpenCL compatible devices found
Hashtype: WPA/WPA2
Speed.Dev.#1.: 71542 H/s (89.15ms)
Started: Wed Sep 21 03:09:41 2016
Stopped: Wed Sep 21 03:09:51 2016
thanks for the update
HELLO!
my operating system which I am trying to run the hashcat is Windowns 10 ANNIVERSARY UPDATE.
Apparently, I am with all the minimum requirements to run this program, however, when running (adiministrador), configure all the parameter settings as hash type WPA / WPA2, and wordlist. however when you click SEEK END DESTROY. I open a pront window with the following initial parameters:
hashcat (v3.10) starting...
OpenCL Platform #1: Intel(R) Corporation
========================================
- Device #1: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz, 509/2039 MB allocatable, 2MCU
Hashes: 1 hashes; 1 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Rules: 1
Applicable Optimizers:
* Zero-Byte
* Single-Hash
* Single-Salt
* Slow-Hash-SIMD
Watchdog: Temperature abort trigger disabled
Watchdog: Temperature retain trigger disabled
Initializing device kernels and memory...
ERROR: clCreateContext(): CL_UNKNOWN_ERROR
C:\Users\almei\Desktop\hashcat>
simply is this error at the end: ERROR: clCreateContext(): CL_UNKNOWN_ERROR
which could be, for I am with SDK installed on my PC and OpenCL installed too!
I follow all the minimum requirement parameters, however I am with this problem! can help me please
details on Attachment files
(10-24-2016, 08:20 PM)hackerentreprise Wrote: [ -> ]HELLO!
my operating system which I am trying to run the hashcat is Windowns 10 ANNIVERSARY UPDATE.
Apparently, I am with all the minimum requirements to run this program, however, when running (adiministrador), configure all the parameter settings as hash type WPA / WPA2, and wordlist. however when you click SEEK END DESTROY. I open a pront window with the following initial parameters:
hashcat (v3.10) starting...
OpenCL Platform #1: Intel(R) Corporation
========================================
- Device #1: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz, 509/2039 MB allocatable, 2MCU
Hashes: 1 hashes; 1 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Rules: 1
Applicable Optimizers:
* Zero-Byte
* Single-Hash
* Single-Salt
* Slow-Hash-SIMD
Watchdog: Temperature abort trigger disabled
Watchdog: Temperature retain trigger disabled
Initializing device kernels and memory...
ERROR: clCreateContext(): CL_UNKNOWN_ERROR
C:\Users\almei\Desktop\hashcat>
simply is this error at the end: ERROR: clCreateContext(): CL_UNKNOWN_ERROR
which could be, for I am with SDK installed on my PC and OpenCL installed too!
I follow all the minimum requirement parameters, however I am with this problem! can help me please
details on Attachment files
try to uninstall ur opencl and ur gpu driver then reinstall
HELLO!
currently, my video card is onboard(video card 256mb), as uninstall driver and installed restarted ... and nothing ...
still the same error.
my motherboard is somewhat old, and my processor is a Core (TM) 2 Duo CPU E4500 @ 2.20GHz
hashcat (v3.10) starting...
OpenCL Platform #1: Intel(R) Corporation
========================================
- Device #1: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz, 509/2039 MB allocatable, 2MCU
Hashes: 1 hashes; 1 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Rules: 1
Applicable Optimizers:
* Zero-Byte
* Single-Hash
* Single-Salt
* Slow-Hash-SIMD
Watchdog: Temperature abort trigger disabled
Watchdog: Temperature retain trigger disabled
Initializing device kernels and memory...
ERROR: clCreateContext(): CL_UNKNOWN_ERROR
C:\Users\almei\Desktop\hashcat>
HELLO!
currently, my video card is onboard(video card 256mb), as uninstall driver and installed restarted ... and nothing ...
still the same error.
my motherboard is somewhat old, and my processor is a Core (TM) 2 Duo CPU E4500 @ 2.20GHz
hashcat (v3.10) starting...
OpenCL Platform #1: Intel(R) Corporation
========================================
- Device #1: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz, 509/2039 MB allocatable, 2MCU
Hashes: 1 hashes; 1 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Rules: 1
Applicable Optimizers:
* Zero-Byte
* Single-Hash
* Single-Salt
* Slow-Hash-SIMD
Watchdog: Temperature abort trigger disabled
Watchdog: Temperature retain trigger disabled
Initializing device kernels and memory...
ERROR: clCreateContext(): CL_UNKNOWN_ERROR
C:\Users\almei\Desktop\hashcat>
some told me that if I use the bin (exe) 2.01, 64-bit this problem would end, so I ask:
where I find the download gui binary (exe) 2:01 FOR WINDOWS? when access the official site hascat only available 3.10 or 3.0 ... have any FTP address? or link?
thank you
To get old Core2 running, you need to use an old version of Intels OpenCL runtime, but I can't remember which version it was. Newer versions are broken (not hashcats fault).