Hello,
I'm building a cracking machine and have aprox. 4k dollars for it.
The config i'm thinking is something like:
Intel Core I7-8700k
CORSAIR Vengeance LPX 32G
Samsung 850
3 x EVGA GeForce GTX 1080 Ti
MSI Z370 GAMING M5
Is this a good config?
I also have a doubt regarding the power supply. I've used the evga power meter and it recommends a power supply with 1300 watts. Is it really enough?
Thanks!
At work we use 220V power supplies with 30A breakers to run 8x GPU rigs in a rackmount scenario. But we also run a farm of hashing nodes. Each rig has 2x power supplies that are redundant to each other. (One PSU is enough to run the entire box but the box will balance the load over the two PSUs).. each PSU shares a circuit with a neighboring hash node in a chain manner. Node A is connected to circuit 1 and 2, Node B is connected to circuit 2 and 3, Node C is connected to circuit 3 and 4 and so on. Probably a little more overkill on power than you need but definitely consider the amperage of the outlets you are going to plug into - 110v maxes out FAST!
Don't cut corners on hardware and it won't cut corners on you. I'd honestly just run reference cards instead of going with the EVGA but that's me. The EVGA's would cause a lot of heating problems due to non-radial airflow in my place of work's scenario. As for PSU: don't go cheap - that is probably one of the most important pieces of your hashing rig as it supplies all the fuel necessary to run the rig. Avoiding cheap doesn't mean you need a 2400 watt power supply, it means you need a trusted name in PSUs. I love Antec for custom "server" builds but I also don't build the rigs at work. Not sure what they are using exactly.
I can't really answer much more as I'm not one of the system's maintainers - just an operator of the front end that we use.
Look up Dustin Heyywood's presentation at DerbyCon from a few years ago. He talks a lot about building and operating a hashing farm for IBM's X-Force pen test team. He gives out a lot of great info that's backed by his experience.
Here's the link with the Iron Geek article and video embedded:
https://www.irongeek.com/i.php?page=vide...in-heywood
Also, at home for my own education, I run hashtopolis for my single GPU rig. It makes managing and building out a hash queue simple and easy, even for one node. I run hashtopolis right on the node.
I’d probably look for FE cards and a high quality 1600W PSU. A 1080 Ti can use 300W each, already putting you at about 70% of your maximum, not including CPU, HDD, and fans.
I've decided to go on using the FE edition and also a 1600W power supply from EVGA. I've watched the recommended video JCas told me to, it was really informative.
Thanks a lot for spending time to give such detailed answers.