hashcat Forum

Hello everyone,
on the comparison table provided by oclHashCat-Plus
is shown that with 2x6990 you can get 9.9 M/s
however I have different combinations - 2x6990, 1x6990+2x5970, 3x7970 and I'm unable to get more than 4.5 M/s
Is there a problem with the new version because when the comparison table was made it was other version without bruteforce mechanism. I tried with all the values for -n and loops.
OclHashCat found all the GPUs just get slow speed and GPUs are all up to about 30%.
Can someone check this and write the results with different cards ?
Thanks in advance

plus does not support 7970, wonder how you could have test it. also plus does not support mixed gpu types. do 2x6990 only or 2x5970. that might be your problem.

(02-02-2012, 05:58 PM)atom Wrote: [ -> ]plus does not support 7970, wonder how you could have test it. also plus does not support mixed gpu types. do 2x6990 only or 2x5970. that might be your problem.

I will try it for sure.
however with 3x7970 if I run oclhashcat in windows with 32 bit binary it works... but very slow
if I run 64 bit it is not working.
Windows is 64 bits and as far as I read about it - it is not yet supported ( the 7 series )
I will try only one type at a time
thanks

Mixed GPU support added to latest version, thread closed.